In case your cigarette lighter has stopped working, one of many first issues it’s best to test is the fuse. A blown fuse can stop the lighter from getting energy, and it is a comparatively straightforward repair. On this article, we’ll present you the way to change a cigarette lighter fuse in only a few easy steps.
Earlier than you begin, it is necessary to collect the instruments you may want. You will want a brand new fuse, a pair of needle-nose pliers, and a small screwdriver. After getting your instruments, you may observe these steps to switch the fuse:
1. Find the fuse field. The fuse field is normally situated underneath the dashboard, however it might differ relying on the make and mannequin of your automotive. As soon as you’ve got discovered the fuse field,
open it up and find the fuse for the cigarette lighter. It ought to be labeled “Cigarette Lighter” or “Energy Outlet”.
2. Take away the previous fuse. Use the needle-nose pliers to softly pull the previous fuse out of the fuse field. Watch out to not contact the metallic contacts on the fuse, as this will injury it.
3. Insert the brand new fuse. Take the brand new fuse and insert it into the fuse field. Ensure that the fuse is correctly seated within the fuse field, and that the metallic contacts are making good contact.
4. Shut the fuse field. As soon as you’ve got inserted the brand new fuse, shut the fuse field and tighten the screws.
5. Take a look at the cigarette lighter. Activate the ignition and take a look at utilizing the cigarette lighter. If the lighter works, then you definately’ve efficiently changed the fuse.
Figuring out the Cigarette Lighter Fuse
Pinpointing the suitable fuse to your car’s cigarette lighter could be a complicated job, particularly contemplating the variations in fuse field areas and fuse configurations amongst completely different makes and fashions. To simplify this course of, seek advice from your car’s proprietor’s guide, which is able to present complete info on fuse identification and alternative procedures.
Consulting the Proprietor’s Handbook
Find the fuse field diagram and index throughout the proprietor’s guide. Every fuse will likely be labeled with a particular designation, akin to “CIG LIGHTER,” “ACC,” or “POWER OUTLET.” The diagram will point out the fuse’s exact location throughout the fuse field.
Checking the Fuse Panel
Open the fuse field and examine the inside. Fuses are usually organized in rows and columns and are simply identifiable by their coloured caps and the printed numerical or alphabetical codes on their sides. Match the fuse’s code to the one listed within the proprietor’s guide to find out if it’s the cigarette lighter fuse.
Checking the Fuse
Use a fuse tester or visually examine the fuse to confirm if it has blown. A blown fuse may have a visual break within the filament that runs by way of its middle. If the fuse seems intact, it could nonetheless be defective and ought to be changed as a precaution.
As soon as the cigarette lighter fuse has been recognized, you may proceed to switch it with a brand new one of many similar amperage score. All the time seek advice from the proprietor’s guide for particular fuse amperage and alternative directions.
| Fuse Location | Fuse Designation | Amperage Ranking | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fuse Field Underneath Dashboard | CIG LIGHTER | 15A | |||||||||||||||||||||||
| Engine Compartment Fuse Field | ACC | 20A | |||||||||||||||||||||||
| Fuse Panel Behind Glove Field | POWER OUTLET | 10A | |||||||||||||||||||||||
| Location | Description |
|---|---|
| Passenger Compartment | Underneath the dashboard, close to the motive force’s facet footwell |
| Underneath the Hood | On the firewall, close to the battery or air filter housing |
| Within the Trunk | Across the wheel nicely areas within the rear inside of the trunk |
Eradicating the Outdated Fuse
Earlier than engaged on any electrical elements, it’s essential to disconnect the car’s battery to stop brief circuits or electrical shocks. As soon as the battery is disconnected, observe these steps to take away the previous fuse:
- Find the fuse field: Seek the advice of your car’s proprietor’s guide to find out the situation of the fuse field that incorporates the cigarette lighter fuse.
- Establish the cigarette lighter fuse: Seek advice from the fuse diagram contained in the fuse field to determine the fuse that corresponds to the cigarette lighter. The diagram will usually point out the situation and amperage score of the fuse.
-
Take away the previous fuse: Most fuse containers use a built-in fuse puller or present one in a small compartment throughout the field.
Inserting the fuse puller into the slot subsequent to the fuse, gently pry the fuse upwards to launch it. Keep away from touching the metallic contacts of the fuse to stop injury or electrical shocks.
If a fuse puller shouldn’t be obtainable, you may fastidiously use a pair of needle-nose pliers to grip the sides of the fuse and take away it. Once more, deal with the fuse with warning and keep away from touching the metallic contacts.
Troubleshooting Widespread Points
1. Test the Cigarette Lighter Fuse
Your cigarette lighter fuse is usually situated within the fuse field underneath the dashboard or within the engine compartment. Seek the advice of your car’s fuse diagram to determine the proper fuse. If the fuse is blown, you’ll want to change it with a fuse of the identical amperage score.
2. Examine the Wiring
Examine the wiring linked to the cigarette lighter for any injury or unfastened connections. Search for frayed or burnt wires, and tighten any unfastened connections you discover.
3. Clear the Terminals
The terminals on the cigarette lighter and the socket it plugs into can grow to be corroded over time. Use a comfortable material or a cotton swab to scrub each terminals with rubbing alcohol to take away any dust or corrosion.
4. Examine the Energy Outlet
The ability outlet itself can fail resulting from quite a lot of causes. Guarantee the facility outlet is clear and freed from particles. If the outlet is broken, chances are you’ll want to switch it with a brand new one.
5. Reset the Electrical System
Typically, {the electrical} system might must be reset to resolve points with the cigarette lighter. To do that, disconnect the destructive terminal of the battery for a couple of minutes after which reconnect it. This may reset {the electrical} system and should resolve any electrical glitches inflicting issues with the cigarette lighter.
6. Test for different Electrical Points
If in case you have checked the entire above and the cigarette lighter nonetheless doesn’t work, there could also be different electrical points in your car. Chances are you’ll have to seek the advice of an expert mechanic to diagnose and restore these points.
Security Precautions
1. Disconnect the Battery
Earlier than changing any fuse, at all times disconnect the battery’s destructive terminal. This may stop any electrical shocks or injury to the car’s electrical system.
2. Find the Fuse Field
The fuse field is usually situated underneath the dashboard or within the engine compartment. Seek the advice of your car’s proprietor’s guide for its actual location.
3. Establish the Cigarette Lighter Fuse
The cigarette lighter fuse is normally labeled "CIGAR" or "ACC" within the fuse field. Nonetheless, it is best to seek advice from your car’s fuse diagram for the precise location and score of the fuse.
4. Take away the Fuse
Use a fuse puller or needle-nose pliers to softly take away the blown fuse. Examine the fuse for any indicators of harm, akin to a damaged wire or burned-out factor.
5. Change the Fuse
If the fuse is blown, change it with a brand new one of many similar amperage score. Don’t use a fuse with the next amperage score, as this might trigger injury to {the electrical} system.
6. Examine the Cigarette Lighter Circuit
As soon as the brand new fuse is put in, reconnect the battery and check the cigarette lighter. If it nonetheless would not work, there could also be a difficulty with the cigarette lighter circuit itself. Examine the wiring for any unfastened connections or injury.
Troubleshooting Desk:
| Troubleshooting Step | Attainable Trigger | Answer |
|---|---|---|
| Cigarette lighter fuse blows repeatedly | Quick circuit within the cigarette lighter circuit | Disconnect cigarette lighter elements and examine wiring for injury |
| Cigarette lighter not working even with a brand new fuse | Defective cigarette lighter | Change cigarette lighter |
| Cigarette lighter works intermittently | Unfastened connections within the circuit | Tighten connections and examine wiring for injury |
Ideas for Prevention
Stopping a blown cigarette lighter fuse is essential to take care of the performance of your car’s electrical system. Listed below are some preventive measures:
1. Keep away from Overloading
Extreme electrical load can pressure the fuse and trigger it to blow. Keep away from plugging too many equipment into your automotive’s 12-volt retailers.
2. Test Connections
Unfastened or broken electrical connections can result in brief circuits and fuse failure. Recurrently examine the wiring and connections for any indicators of harm.
3. Use Acceptable Fuse
All the time change a blown fuse with one of many appropriate amperage score. Utilizing a fuse with the next amperage can result in overheating and electrical injury.
4. Maintain It Clear
Mud and dust can accumulate across the fuse panel and trigger corrosion. Maintain the realm clear to stop electrical points.
5. Take a look at Recurrently
For those who ceaselessly blow fuses, take into account having your car’s electrical system inspected by a certified mechanic. They will determine and resolve any underlying electrical issues, akin to a defective alternator or battery.
6. Test Fuse Holder
The fuse holder might grow to be unfastened or corroded over time, resulting in intermittent electrical points. Examine the fuse holder recurrently for any indicators of harm.
7. Establish the Trigger
In case your cigarette lighter fuse blows repeatedly, it is important to determine the underlying trigger. Seek the advice of an electrician or mechanic to find out the precise problem and stop future fuse failures. Widespread causes embrace defective home equipment, shorted wires, and malfunctioning electrical elements.
By following the following pointers, you may successfully scale back the chance of cigarette lighter fuse failures and make sure the easy functioning of your car’s electrical system.
Utilizing Jumper Cables as an Different
In case you do not have a spare fuse helpful, you should use jumper cables to briefly bypass the blown fuse and restore energy to your cigarette lighter. This is how:
- Park your automotive subsequent to a different car with a working battery.
- Join one finish of the optimistic jumper cable (normally crimson) to the optimistic terminal on the useless battery.
- Join the opposite finish of the optimistic jumper cable to the optimistic terminal on the working battery.
- Join one finish of the destructive jumper cable (normally black) to the destructive terminal on the working battery.
- Join the opposite finish of the destructive jumper cable to an unpainted metallic floor on the car with the blown fuse.
- Begin the engine of the car with the working battery.
- Take a look at the cigarette lighter to see if it is working.
- As soon as the cigarette lighter is working, disconnect the jumper cables in reverse order: first the destructive cable from the unpainted metallic floor, then the destructive cable from the working battery, then the optimistic cable from the working battery, and at last the optimistic cable from the useless battery.
Keep in mind that utilizing jumper cables as a substitute is simply a short lived answer. It is really useful to switch the blown fuse as quickly as doable to stop any electrical issues.
How To Change Cigarette Lighter Fuse
1. Security First
Earlier than you begin working in your automotive’s electrical system, it is at all times necessary to take security precautions. Ensure the automotive is parked in a protected place and that the engine is turned off. Disconnect the destructive terminal of the battery to stop any electrical shocks.
2. Find the Fuse Field
The fuse field is normally situated underneath the dashboard, both on the motive force’s facet or the passenger’s facet. Seek the advice of your automotive’s guide to search out the precise location.
3. Establish the Cigarette Lighter Fuse
As soon as you’ve got situated the fuse field, you’ll want to determine the fuse that powers the cigarette lighter. The fuse will likely be labeled both “CIG” or “Cigarette Lighter.”
4. Take away the Outdated Fuse
Use a fuse puller or a pair of needle-nose pliers to softly take away the previous fuse from its socket.
5. Examine the Fuse
Examine the previous fuse to see if it is blown. A blown fuse may have a damaged filament.
6. Insert the New Fuse
Insert the brand new fuse into the socket, ensuring that it is oriented accurately. The fuse ought to match snugly into the socket.
7. Take a look at the Cigarette Lighter
Reconnect the destructive terminal of the battery and activate the automotive. Take a look at the cigarette lighter to ensure it is working correctly.
8. Troubleshooting
If the cigarette lighter nonetheless would not work after changing the fuse, there could also be one other drawback. Test the wiring to the cigarette lighter and guarantee that it is not broken.
9. Seek the advice of a Mechanic
For those who’re not comfy changing the cigarette lighter fuse your self, or should you’ve tried troubleshooting and the issue persists, you may seek the advice of a mechanic.
Closing Ideas
Changing a cigarette lighter fuse is a comparatively easy job that may be performed in a couple of minutes. By following these steps, you may simply repair a damaged cigarette lighter and get again to having fun with your smoke-free drive.
| Fuse Location | Fuse Sort |
|---|---|
| Underneath the dashboard, driver’s facet | Mini fuse |
| Underneath the dashboard, passenger’s facet | Commonplace fuse |
How To Change Cigarette Lighter Fuse
In case your cigarette lighter shouldn’t be working, one doable trigger is a blown fuse. Changing the fuse is a straightforward course of that may be accomplished in a couple of minutes. Listed below are the steps on the way to change cigarette lighter fuse:
- Find the fuse field. The fuse field is normally situated underneath the dashboard on the motive force’s facet. It’s a small, black field with a lid that may be opened.
- Establish the cigarette lighter fuse. The fuse for the cigarette lighter is normally labeled with an image of a cigarette lighter or the letters "CL."
- Take away the blown fuse. Use a pair of needle-nose pliers to take away the blown fuse from the fuse field.
- Insert a brand new fuse. Insert a brand new fuse of the identical amperage because the blown fuse into the fuse field.
- Shut the fuse field lid. Shut the lid of the fuse field and snap it into place.
- Take a look at the cigarette lighter. Activate the ignition and check the cigarette lighter to ensure it’s working.
Individuals Additionally Ask About How To Change Cigarette Lighter Fuse
How do I do know if the cigarette lighter fuse is blown?
In case your cigarette lighter shouldn’t be working, one method to inform if the fuse is blown is to take a look at the fuse. If the fuse is blown, the wire contained in the fuse will likely be damaged.
What amperage fuse do I would like for my cigarette lighter?
The amperage of the fuse you want to your cigarette lighter will rely upon the make and mannequin of your car. You could find the proper amperage fuse by wanting in your car’s proprietor’s guide.
The place is the cigarette lighter fuse situated?
The cigarette lighter fuse is normally situated within the fuse field underneath the dashboard on the motive force’s facet.
