Skilled Handyman Service FEATURED IMAGE
Towel bars are widespread lavatory fixtures which might be used to hold towels. If you wish to take away a towel bar out of your wall, it is very important accomplish that fastidiously to keep away from damaging the wall or the towel bar. You will have just a few important instruments to finish this activity.
Earlier than you start, flip off the water provide to the toilet. It will forestall any water from leaking out of the pipes if you take away the towel bar. Use a wrench to loosen the nuts that safe the towel bar to the wall. Watch out to not overtighten the nuts, as this might injury the towel bar. As soon as the nuts are unfastened, you may gently pull the towel bar away from the wall. If the towel bar doesn’t come away simply, use a hammer to faucet it gently till it loosens.
Place the towel bar in a protected location. Use a putty knife to softly scrape away any caulk or adhesive that’s left on the wall. As soon as the wall is clear, you may set up a brand new towel bar.
Getting ready the Mandatory Instruments
To successfully take away a towel bar from a wall, it’s crucial to collect the suitable instruments and supplies. This is a complete record of what you will want:
Instruments:
- Phillips head screwdriver: A correctly sized Phillips head screwdriver is important for loosening and eradicating the screws that maintain the towel bar in place.
- Flathead screwdriver: A flathead screwdriver could be useful for prying the towel bar unfastened from the wall if it has been securely fixed.
- Adjustable wrench: An adjustable wrench can be utilized to take away any nuts or bolts that could be securing the towel bar to the wall.
- Hammer: A hammer could be helpful for gently tapping the towel bar if it has develop into caught or is tough to take away.
- Putty knife: A putty knife can be utilized to softly scrape away any caulk or adhesive that could be holding the towel bar in place.
Supplies:
- Security glasses: Security glasses are important for safeguarding your eyes from any particles or particles that will fly off as you’re employed.
- Gloves: Gloves may help defend your arms from cuts or abrasions.
- Drop fabric or tarp: A drop fabric or tarp could be positioned underneath the towel bar to catch any particles or mud that will fall through the elimination course of.
| Software | Function |
|---|---|
| Phillips head screwdriver | Loosen and take away screws |
| Flathead screwdriver | Pry towel bar unfastened |
| Adjustable wrench | Take away nuts or bolts |
| Hammer | Faucet towel bar if caught |
| Putty knife | Scrape away caulk or adhesive |
Finding the Mounting Screws
Discovering the mounting screws to your towel bar could be a easy activity, but it surely would possibly require some detective work if they’re well-hidden. Listed below are some steps that will help you find them:
1. Examine for Seen Screws
In some circumstances, the mounting screws could also be seen on the entrance of the towel bar. Search for small, spherical, or Phillips-head screws which might be barely recessed into the floor. When you see any screws, you may proceed to take away them.
2. Examine the Sides and Again of the Towel Bar
If there are not any seen screws on the entrance, verify the perimeters and again of the towel bar. Typically, the screws could also be hidden by an ornamental cowl or trim. Gently pull or slide the quilt away to show the screws. When you nonetheless cannot discover any screws, it is potential that they’re hid by a layer of caulk or sealant.
| Kind of Towel Bar | Location of Mounting Screws |
|---|---|
| Hid Screw Towel Bar | Screws are hidden behind an ornamental cowl or trim |
| Floor-Mounted Towel Bar | Screws are seen on the entrance of the towel bar |
| Recessed Screw Towel Bar | Screws are hid by a layer of caulk or sealant |
3. Use a Stud Finder or Magnet
When you suspect that the screws are hid by caulk, you should use a stud finder or a magnet to find them. A stud finder will detect the steel screws behind the caulk, whereas a magnet will probably be interested in the screws if they’re product of ferrous steel.
4. Probe with a Skinny Object
If all else fails, you may attempt probing the floor across the towel bar with a skinny object, akin to a needle or wire. When you encounter any resistance or a delicate spot, there’s probably a screw positioned beneath.
Utilizing a Screwdriver to Take away Screws
In case your towel bar is held in place by screws, you will want to make use of a screwdriver to take away them. This is easy methods to do it:
- Collect your instruments. You may want a Phillips head screwdriver that matches the dimensions of the screws holding the towel bar in place.
- Find the screws. The screws are normally positioned on the underside of the towel bar, or on the perimeters if it is a horizontal bar.
- Take away the screws. Use the screwdriver to show the screws counterclockwise till they’re utterly eliminated. If the screws are rusted or corroded, chances are you’ll want to make use of a penetrating oil to loosen them up.
Screw Kind of Screwdriver Phillips head Phillips head screwdriver Flat head Flat head screwdriver Torx head Torx head screwdriver - Take away the towel bar. As soon as the screws are eliminated, the towel bar ought to come off the wall simply. If it is nonetheless caught, chances are you’ll want to make use of a pry bar or a hammer to softly faucet it unfastened.
Loosen the Screws
To take away a towel bar from the wall, you will have to loosen the screws which might be holding it in place. These screws are sometimes positioned on the underside of the bar, they usually could also be coated by small caps. Use a screwdriver to take away the caps, after which use the screwdriver to loosen the screws. Watch out to not overtighten the screws, as this will injury the wall.
| Screw Kind |
|---|
| Phillips head |
| Flat head |
| Allen key |
As soon as the screws are unfastened, it’s best to be capable to pull the towel bar away from the wall. If the bar continues to be caught, chances are you’ll want to make use of a putty knife or a skinny piece of steel to pry it unfastened. Watch out to not injury the wall or the towel bar when doing this.
Disconnect the Towel Bar from the Wall
Upon getting positioned the set screws, it’s essential loosen them with the assistance of an Allen wrench. Whereas this course of could appear easy, it is very important strategy it with warning to keep away from damaging the screws or the towel bar itself. This is a step-by-step information to securely loosening the set screws:
- Safe the Allen wrench within the set screw.
- Apply light stress to the wrench and switch it counterclockwise to loosen the screw.
- Proceed turning the screw till it’s utterly unfastened and could be eliminated by hand.
- Repeat this course of for the remaining set screws, making certain that every one screws are totally loosened.
- As soon as all of the set screws are eliminated, it’s best to be capable to gently pull the towel bar away from the wall.
This is a desk summarizing the steps for loosening set screws:
| Step | Description |
|---|---|
| 1 | Safe Allen wrench in set screw |
| 2 | Flip wrench counterclockwise to loosen screw |
| 3 | Proceed turning till screw is unfastened and detachable by hand |
| 4 | Repeat for remaining set screws |
| 5 | Pull towel bar away from wall as soon as all screws are eliminated |
Keep in mind to deal with the towel bar with care to stop any injury through the elimination course of.
Use Pry Bar for Additional Leverage
For cussed towel bars that will not budge with a screwdriver, a pry bar gives additional leverage and power. This is easy methods to use a pry bar successfully:
Security First
- Put on security glasses to guard your eyes from particles.
- Use a pry bar that’s sturdy sufficient to deal with the duty.
- Select a flathead attachment that matches snugly underneath the sting of the towel bar.
Positioning the Pry Bar
- Find the attachment level the place the towel bar was screwed into the wall.
- Slide the flathead attachment of the pry bar underneath the sting of the towel bar, as near the attachment level as potential.
- Make sure the attachment is securely lodged underneath the bar to stop slippage.
Making use of Leverage
- Maintain the pry bar parallel to the wall, with the deal with dealing with away from you.
- Apply regular downward stress to create leverage.
- Progressively improve the power till the towel bar begins to loosen from the wall.
Eradicating the Towel Bar
As soon as the towel bar is unfastened, gently pry it away from the wall utilizing the pry bar. Watch out to not injury the wall or the encircling space. As soon as the bar is totally eliminated, eliminate it or repurpose it as desired.
| Security Suggestions for Utilizing a Pry Bar |
|---|
| Put on security glasses and gloves. |
| Select a pry bar with the suitable measurement and energy. |
| Place the pry bar securely underneath the towel bar. |
| Apply downward power steadily, avoiding jerking motions. |
| Be cautious when the towel bar loosens to stop it from falling or inflicting injury. |
Apply Power to Raise the Towel Bar
Upon getting loosened the towel bar, it is time to apply power to raise it from the wall. Watch out to not injury the wall or the towel bar itself. This is easy methods to do it:
1. Grip the towel bar firmly with each arms.
2. Place your ft shoulder-width aside for stability.
3. Bend your knees barely and decrease your physique till you might be near the wall.
4. Place your forearms towards the wall on both aspect of the towel bar.
5. Push towards the wall together with your forearms, whereas concurrently pulling up on the towel bar together with your arms.
6. Proceed pushing and pulling till the towel bar lifts off the wall.
7. Be ready for the towel bar to be heavy, particularly whether it is product of a sturdy materials like steel. If you’re struggling to raise it, ask for assist from a pal or member of the family.
As soon as the towel bar is lifted off the wall, you may take away the mounting {hardware} and proceed with the following steps of the elimination course of.
| Lifting Suggestions |
|---|
| Use a towel or fabric to guard your arms from the wall floor. |
| If the towel bar is especially heavy, think about using a pry bar to assist raise it. |
| Watch out to not bend or injury the towel bar when lifting it. |
Clear the Mounting Space
Earlier than eradicating the towel bar, it is essential to scrub the mounting space totally. This step removes any grime or particles that would intrude with the elimination course of or injury the wall throughout elimination.
Step-by-Step Information to Cleansing the Mounting Space:
1. Collect your cleansing provides, together with a humid fabric, a cleansing resolution, and a scrub brush (if crucial).
2. Apply the cleansing resolution to the mounting space utilizing the damp fabric.
3. If there’s important grime or grime, use the scrub brush to softly scrub the realm.
4. Rinse the mounting space with clear water to take away the cleansing resolution.
5. Dry the mounting space totally with a clear towel or fabric.
By following these steps, you may be certain that the mounting space is clear and ready for the following steps in eradicating the towel bar.
Seal the Holes
As soon as you have efficiently eliminated your towel bar from the wall, it is time to seal the holes left behind. It will forestall drafts, moisture, and pests from getting into your private home. To seal the holes, you will want the next supplies:
- Caulk gun
- Paintable caulk
- Putty knife
- Damp fabric
Observe these steps to seal the holes:
- Apply a beneficiant quantity of caulk to the tip of the caulk gun.
- Insert the caulk gun into the outlet and squeeze the set off to dispense the caulk.
- Easy the caulk with a putty knife or your finger, ensuring to fill the outlet utterly.
- Wipe away any extra caulk with a humid fabric.
- Enable the caulk to dry utterly earlier than portray or wallpapering.
When you’re sealing holes in a rest room or kitchen, chances are you’ll wish to use a silicone-based caulk, which is extra immune to moisture.
As soon as the holes are sealed, your wall will probably be prepared for a contemporary coat of paint or wallpaper.
How To Take away A Towel Bar From Wall
1. Collect your instruments.
You will have a screwdriver, a pair of pliers, and a putty knife.
2. Flip off the water provide.
That is necessary to stop water from leaking out if you take away the towel bar.
3. Take away the screws.
Use the screwdriver to take away the screws which might be holding the towel bar in place.
4. Take away the towel bar.
Gently pull the towel bar away from the wall.
5. Clear the realm.
Use the putty knife to scrub the realm the place the towel bar was mounted.
6. Apply caulk.
Apply a bead of caulk across the perimeter of the brand new towel bar.
7. Set up the brand new towel bar.
Press the brand new towel bar into place and maintain it for a couple of minutes till the caulk units.
8. Activate the water provide.
Examine for leaks.
9. Take pleasure in your new towel bar!
You might have now efficiently eliminated and put in a towel bar.
Re-install the New Towel Bar
To re-install the brand new towel bar, comply with these steps:
- Mark the situation. Use a pencil to mark the situation of the brand new towel bar.
- Drill pilot holes. Drill small pilot holes on the marked places.
- Insert screws. Screw the screws into the pilot holes till they’re flush with the wall.
- Grasp the towel bar. Grasp the towel bar on the screws.
- Tighten the screws. Tighten the screws till the towel bar is safe.
How you can Take away a Towel Bar from the Wall
Towel bars could be a handy and classy addition to any lavatory or kitchen, however there might come a time when it’s essential take away one. Whether or not you are renovating your house or just wish to change the location of your towel bar, eradicating it may be a simple activity with the suitable instruments and somewhat little bit of persistence.
Earlier than you start, collect the required instruments: a screwdriver, a putty knife or razor blade, and a bucket or plastic bag for particles. Upon getting your instruments, comply with these steps to take away the towel bar safely and effectively:
- Take away the set screws. Most towel bars are held in place by two set screws which might be positioned on the underside of the bar. Use the screwdriver to loosen these screws and take away them utterly.
- Gently pry the towel bar away from the wall. Use the putty knife or razor blade to fastidiously pry the towel bar away from the wall. Be light to keep away from damaging the wall or the towel bar.
- Clear the wall and towel bar. Use a humid fabric to scrub any remaining adhesive or particles from the wall and the towel bar. It will assist to organize the surfaces for reinstallation or disposal.
