Hanging a microwave beneath the cupboard is a good way to avoid wasting counter area and maintain your kitchen trying organized. However with so many various kinds of microwaves and cupboards, it may be troublesome to know the place to begin.
Listed here are a couple of suggestions that will help you get began: First, it’s good to select the best microwave. Not all microwaves are designed to be hung beneath a cupboard. Be sure to test the producer’s directions earlier than you buy a microwave.
After getting chosen a microwave, it’s good to discover the best spot. The microwave needs to be hung at a top that’s snug so that you can attain and use. You must also make it possible for the microwave shouldn’t be too near the cupboard above it. In any other case, the door might not open correctly.
After getting discovered the best spot, it’s good to mount the microwave. There are a couple of alternative ways to mount a microwave beneath a cupboard. You should utilize a bracket, a countertop mount, or a wall mount. One of the best ways to mount a microwave will rely upon the kind of microwave you may have and the kind of cupboard you may have.
Making ready the Cupboard and Microwave
Making ready the Cupboard
1. Measure and mark the placement of the microwave on the underside of the cupboard. Make sure the chosen spot supplies sufficient clearance for the microwave’s door and air flow.
2. Test for obstructions, comparable to wires or pipes, that will hinder the set up.
3. Assemble the mounting bracket that can assist the microwave. Comply with the producer’s directions to make sure correct meeting.
4. Place the mounting bracket within the marked location and safe it with screws or bolts.
5. Make sure the mounting bracket is degree and durable earlier than continuing to the following step.
Making ready the Microwave
1. Unpack the microwave and take away all protecting supplies.
2. Measure the space between the mounting holes on the again of the microwave.
3. Find the mounting holes on the mounting bracket that correspond to the microwave’s measurements.
4. Elevate the microwave and align it with the mounting bracket.
5. Slowly slide the microwave onto the bracket, making certain it matches securely.
6. Tighten the screws or bolts that maintain the microwave in place.
7. Join the microwave to an influence outlet and test that it’s functioning accurately.
Putting in the Mounting Bracket
The mounting bracket is an integral part that gives stability and assist to your microwave when put in beneath a cupboard. To make sure a safe set up, comply with these steps fastidiously:
1. Measure and Mark the Bracket Place
Use a measuring tape to find out the specified top and site of the microwave beneath the cupboard. Mark the corresponding factors on the wall the place the bracket shall be mounted.
2. Put together the Wall
Test the wall materials to make sure it could possibly assist the burden of the microwave. If obligatory, use acceptable anchors or wall plugs to bolster the mounting floor.
3. Place and Safe the Bracket
Align the mounting bracket with the marked factors on the wall and safe it firmly utilizing the offered screws or bolts. Make sure the bracket is degree and securely mounted to the wall. It’s essential to make use of screws or bolts which might be the suitable size and diameter for the burden of the microwave and the power of the wall materials.
Screw and Bolt Specs
| Screw/Bolt Sort | Diameter | Size |
|---|---|---|
| Wooden Screws | #8 or #10 | 1 1/4″ – 2″ |
| Lag Bolts | 1/4″ | 2″ – 3″ |
| Plated Wall Anchors | N/A | 2″- 4″ |
As soon as the mounting bracket is securely in place, you may proceed to the following step of the set up course of, which entails attaching the microwave to the bracket.
Securing the Microwave
Selecting the Mounting {Hardware}
Choose mounting {hardware} that’s suitable along with your microwave and cupboard. Widespread {hardware} choices embody mounting brackets, screws, and anchors.
Gathering Instruments
Collect the mandatory instruments for the job, comparable to a drill, screwdriver, degree, and measuring tape.
Marking the Mounting Holes
Measure the space between the mounting holes on the microwave’s again and mark the corresponding places on the underside of the cupboard.
Drilling Pilot Holes
Use a drill with a smaller bit than the screws to drill pilot holes on the marked places. This can assist information the screws and forestall splitting the wooden.
Putting in the Mounting Brackets
Align the mounting brackets with the pilot holes and safe them with screws. Be sure that the brackets are degree and tightly mounted.
Mounting the Microwave
Elevate the microwave onto the mounting brackets and align the mounting holes. Insert screws and tighten them till the microwave is securely connected.
Leveling the Microwave
Use a degree to test the microwave’s alignment and alter the mounting screws as wanted to make sure it’s degree.
Further Ideas for Securing the Microwave:
* Use heavy-duty mounting {hardware} to assist the burden of the microwave.
* Test the microwave’s person guide for particular mounting directions.
* Search skilled help in case you are not assured in performing the set up your self.
* Guarantee there’s adequate air flow across the microwave to forestall overheating.
Connecting the Microwave
As soon as the mounting bracket is securely put in, it is time to join the microwave.
Electrical Connection
Join the microwave’s electrical twine to a grounded, three-prong outlet. The outlet needs to be devoted for the microwave and never shared with different home equipment.
Vent Connection (for Over-the-Vary Microwaves)
In case your microwave has a built-in vent fan, it is going to must be linked to an exterior exhaust duct. Discuss with your microwave’s person guide for particular directions on easy methods to join the vent.
Fuel Connection (for Fuel Microwaves)
Fuel microwaves require a fuel line connection. This needs to be put in by a certified fuel technician.
Desk: Connecting the Microwave
| Connection Sort | Required Parts |
|---|---|
| Electrical | Microwave electrical twine, grounded three-prong outlet |
| Vent (Over-the-Vary) | Microwave vent adapter, exhaust duct |
| Fuel | Microwave fuel hose, fuel line connection |
As soon as all connections are safe, you may activate the microwave and check it to make sure it’s working correctly.
Testing the Set up
1. Plug the microwave into an accessible outlet. Confirm that the microwave is practical by deciding on the “30 seconds” characteristic (or comparable) and putting a 1-cup of water inside. Press “Begin” and observe the microwave for 30 seconds.
2. As soon as the water boils, enable the microwave to chill for a couple of minutes. Open the microwave door and take away the water cup fastidiously.
3. Visually examine the set up for any seen indicators of harm or defects. Search for any free screws, cracks, deformations, or another abnormalities.
4. Check the microwave door by opening and shutting it a number of occasions. Be sure that the door operates easily and closes securely with none gaps or obstacles.
5. Check the microwave turntable by putting a light-weight object within the heart of the plate. Shut the door and activate the microwave for a couple of seconds. Observe if the turntable rotates easily and evenly.
6. Test the microwave’s lighting by urgent the “Mild” button (if the microwave has this characteristic). Confirm that the sunshine activates and off with none flickering or dimming.
7. Use the microwave for a couple of minutes to carry out extra assessments. Warmth a easy dish or a cup of water to evaluate the microwave’s efficiency, performance, and even heating distribution. Observe the microwave’s operation, pay attention for any uncommon noises, and examine the heated meals for any unevenness or inconsistencies.
Putting in the Microwave Bracket
Securely connect the microwave bracket to the underside of the cupboard, making certain it’s degree and aligned with the microwave’s mounting holes.
Hanging the Microwave
Fastidiously carry the microwave and slide it onto the bracket, aligning the mounting holes. Safe the microwave to the bracket utilizing the offered bolts or screws.
Tightening the Screws
Use a screwdriver to tighten the screws that maintain the microwave to the bracket, making certain they’re firmly secured.
Connecting the Energy Wire
Insert the facility twine into the outlet and guarantee it’s securely plugged in.
Testing the Microwave
Activate the microwave and run it at low energy for a couple of minutes to confirm whether it is functioning correctly.
Troubleshooting Widespread Points
Microwave Would not Flip On
Test if the facility twine is plugged in and the outlet is working. Whether it is, reset the microwave by unplugging it and plugging it again in.
Microwave Turns On However Would not Warmth Meals
Be sure the microwave door is closed correctly and the door switches are functioning. Be sure that the turntable is rotating freely and that there is no such thing as a obstruction contained in the microwave.
Microwave Sparks or Smokes
Instantly flip off the microwave and unplug it. Clear the microwave totally, take away any steel utensils, and guarantee there are not any meals spills or grease buildup inside. If the issue persists, contact a certified technician.
| Microwave Dimension | Advisable Cupboard Peak |
|---|---|
| 1.5 cubic ft or much less | 18 inches |
| 1.6 to 2.0 cubic ft | 21 inches |
| 2.1 to 2.5 cubic ft | 24 inches |
Skilled Set up Choices
1. Rent a Licensed Electrician
That is probably the most beneficial possibility in case you are not assured in your DIY abilities or if the set up requires advanced electrical work. A licensed electrician will make sure that the microwave is put in safely and meets all electrical codes.
2. Contact the Microwave Producer
Some microwave producers supply skilled set up companies for an extra payment. This is usually a handy possibility if you wish to make sure that the set up is finished accurately by licensed technicians.
3. Use a House Enchancment Service
Many house enchancment shops and companies supply microwave set up as a part of their companies. These companies usually embody supply, set up, and any obligatory electrical work.
4. Rent a Handyman
In case you are on the lookout for a cheaper possibility, you may rent a handyman to put in your microwave. Nevertheless, make it possible for the handyman has expertise in putting in microwaves and may present references.
5. Lease a Device
In case you are snug with DIY tasks, you may hire a microwave mounting bracket software from a ironmongery store. These instruments make it simpler to align and safe the microwave beneath the cupboard.
6. Use a Mounting Plate
A mounting plate is a steel bracket that attaches to the underside of the microwave and supplies a safe floor for mounting. It is a good possibility if the underside of your cupboard shouldn’t be flat or if you wish to keep away from drilling holes into the cupboard.
7. Use a Microwave Hood Mixture
A microwave hood mixture is a single unit that mixes a microwave and a variety hood. It is a space-saving possibility that’s perfect for kitchens with restricted area.
8. Construct a Customized Shelf
When you’ve got a big microwave or wish to create a extra customized look, you may construct a customized shelf to assist the microwave. This selection requires extra DIY abilities however can present a extra customized answer.
9. Use a Cupboard-Mounted Microwave
Cupboard-mounted microwaves are designed to be put in inside a cupboard, offering a seamless look and saving countertop area. It is a good possibility if in case you have a big kitchen.
10. Contemplate the Following Components When Selecting a Skilled Microwave Set up Possibility
| Issue | Clarification |
|---|---|
| Price | Skilled set up prices can fluctuate relying on the choice you select and the complexity of the job. |
| Comfort | Some choices, comparable to hiring a licensed electrician or utilizing a house enchancment service, supply extra comfort. |
| Expertise | Be sure that the installer you select has expertise in putting in microwaves. |
| Security | Electrical work needs to be achieved by a certified electrician to make sure security. |
| Guarantee | Some set up companies might supply a guaranty on their work. |
How To Dangle Microwave Underneath Cupboard
Hanging a microwave beneath a cupboard might be a good way to avoid wasting counter area and make your kitchen look extra organized. It is also a comparatively straightforward mission that may be accomplished in a couple of hours.
Listed here are the steps on easy methods to hold a microwave beneath a cupboard:
1. Collect your supplies. You will want a microwave, a drill, a screwdriver, a degree, a pencil, and a stud finder.
2. Discover a appropriate location. The microwave needs to be mounted beneath a cupboard that’s at the very least 30 inches above the ground. The cupboard must also be vast sufficient to accommodate the microwave.
3. Mark the placement of the mounting holes. Use a degree to make it possible for the microwave is degree. Then, use a pencil to mark the placement of the mounting holes.
4. Drill the mounting holes. Use a drill to drill the mounting holes. The holes needs to be deep sufficient to accommodate the screws.
5. Insert the screws. Insert the screws into the mounting holes. Tighten the screws till the microwave is securely mounted.
6. Plug within the microwave. Plug the microwave into an outlet. Activate the microwave to make it possible for it’s working correctly.
