Valances, the ornamental material therapies that adorn the higher portion of home windows, add a contact of magnificence and class to any room. They body the window, drawing the attention upward and creating a way of visible curiosity. Whether or not you go for a easy, tailor-made valance or a extra elaborate, pleated design, placing up a valance is a comparatively simple process that may rework the look of your home windows in just some hours.
Earlier than you start, collect your supplies. You will have a valance, curtain rod or stress rod, measuring tape, degree, drill, screws or nails, and a hammer or screwdriver. In case your valance has a lining, you should definitely iron it earlier than hanging it to take away any wrinkles or creases. After you have your supplies, decide the peak at which you need to dangle the valance. To do that, measure from the highest of the window body to the specified peak of the valance. Mark this measurement on the wall utilizing a pencil or masking tape.
Subsequent, set up the curtain rod or stress rod. In case you are utilizing a curtain rod, use a degree to make sure that the rod is degree earlier than drilling the screws into the wall. In case you are utilizing a stress rod, merely prolong the rod to the specified width and place it within the window body. As soon as the rod is put in, dangle the valance by sliding it onto the rod. Regulate the valance till it’s evenly spaced on both aspect of the window and safe it in place utilizing the supplied fasteners, comparable to Velcro or hooks.
Choosing the Proper Valance
Selecting the proper valance to your window remedy can considerably improve the general aesthetic enchantment of your area. Listed here are some key components to contemplate when making your choice:
Cloth and Materials:
The material and materials of your valance ought to complement your present decor and the operate of the room. For a proper setting, luxurious materials like velvet or silk can create a classy ambiance. For extra informal areas, cotton or linen valances provide a comfortable and relaxed vibe. Sheer materials like organza or voile enable pure gentle to filter by way of, whereas blackout materials present privateness and light-weight management.
Type and Design:
Valances are available in a big selection of types, from tailor-made field pleats to flowing tiers. Think about the architectural options of your window and the general design of your room. A scalloped valance can add a contact of Victorian allure, whereas a gathered valance creates a comfortable and female look. For a contemporary aesthetic, go for a easy and streamlined valance.
Dimension and Proportion:
The scale of your valance must be proportionate to the scale of your window. A valance that’s too small will look misplaced, whereas one that’s too giant can overwhelm the area. Typically, valances ought to prolong 6 to 12 inches past the window body on both sides and dangle about one-third to one-half the space from the highest of the window to the ground.
Desk: Valance Dimension and Proportion Pointers
| Window Width | Valance Width | Valance Size |
|---|---|---|
| As much as 36 inches | 48 inches | 12-18 inches |
| 36-48 inches | 60 inches | 15-24 inches |
| 48-60 inches | 72 inches | 18-30 inches |
| Over 60 inches | Customized | Customized |
Measuring and Marking the Space
Figuring out the exact placement of your valance is essential for a flawless set up. Comply with these steps to precisely measure and mark the realm:
Figuring out the Valance Peak
Usually, valances are positioned roughly 4-8 inches (10-20 cm) under the ceiling or the highest of the window body. Think about the general peak of your window and the specified size of the valance when selecting the particular peak.
Marking the Valance Width
Measure the width of the window from the within edges of the window body. Add 6-12 inches (15-30 cm) to this measurement to permit for overlap on both sides of the window. This may be sure that the valance extends past the window body and offers satisfactory protection.
Marking the Valance Place
Use a degree to attract a horizontal line on the desired valance peak on the wall above the window. Switch this line to the ceiling or the highest of the window body, making certain it extends the complete width of the realm you marked earlier.
| Measurement | Location |
|---|---|
| 4-8 inches (10-20 cm) | Beneath the ceiling or window body prime |
| 6-12 inches (15-30 cm) | Overlap on both sides of the window |
Getting ready the {Hardware}
Earlier than starting the set up course of, it is essential to collect the mandatory supplies and put together the {hardware} elements.
Supplies Listing
| Part | Amount |
|---|---|
| Valance rod | 1 |
| Brackets | 2 |
| Mounting screws | 4-8 (relying on bracket sort) |
| Anchors (if vital) | 2-4 |
| Degree | 1 |
| Measuring tape | 1 |
| Stud finder (elective) | 1 |
Getting ready the Brackets
Unpack the brackets and look at them fastidiously. Most brackets have two foremost elements: a mounting plate and an arm. The form and measurement of those elements might fluctuate relying on the bracket sort you’ve got.
Determine the mounting holes on the bracket plate. These are usually situated on the edges or again of the plate. Measure the space between the mounting holes and switch this measurement to the wall the place you propose to put in the valance.
Decide the optimum peak for the valance and mark it on the wall. Use a degree to make sure that the mark is straight. Place the bracket plate in opposition to the wall, aligning the mounting holes with the marks you made. Use a pencil to hint across the define of the plate.
Attaching the Assist Brackets
To make sure a safe maintain to your valance, it is essential to connect the help brackets accurately. Comply with these detailed steps:
1. Decide Bracket Placement
Measure and mark the specified peak of the valance from the highest of the window body. This may decide the middle level of the brackets. For the standard valance, goal for round 4-6 inches above the body.
2. Mark Bracket Holes
Utilizing a degree, place the bracket in opposition to the wall on the marked middle level. Mark the holes for the screws or nails with a pencil or axe.
3. Drill Pilot Holes (Non-compulsory)
In case you’re working with arduous surfaces like concrete or brick, it is advisable to drill shallow pilot holes earlier than inserting the screws. This may make the set up simpler and forestall harm to the wall.
4. Safe Brackets
Align the brackets with the marked holes and insert the screws or nails at an angle. Guarantee they’re firmly tightened to offer satisfactory help. For heavy valances, think about using longer screws or wall anchors for added energy.
| Screw Sort | Beneficial Size |
|---|---|
| Wooden Screws | 1-1/4 to 1-1/2 inches |
| Drywall Screws | 1-1/4 to 2 inches with wall anchors |
| Concrete Screws | 2 to 2-1/2 inches with pilot holes |
Mounting the Rod
To mount the rod, comply with these steps:
- Resolve on the peak at which you need the valance to hold. The highest of the valance must be about 6 inches under the ceiling or the highest of the window body.
- Mark the specified peak on each side of the window body utilizing a pencil or a degree.
- Measure the space between the 2 marks and lower the rod to that size utilizing a hacksaw or a pipe cutter.
- Mount the rod brackets onto the wall on the marked peak. The brackets must be spaced evenly aside, and the rod ought to match snugly into the brackets.
- Place the valance on the rod by sliding the rod by way of the highest of the valance. Make it possible for the valance is evenly gathered and that there aren’t any wrinkles or creases. Regulate the brackets if vital to make sure that the valance is degree and appears straight.
Rod Mounting Choices Inside Mount Outdoors Mount Inside Mount
For an inside mount, the valance is mounted contained in the window body. This can be a good possibility if you would like the valance to be near the window and you probably have restricted area.
Outdoors Mount
For an outdoor mount, the valance is mounted exterior the window body. This can be a good possibility if you would like the valance to be extra seen and you probably have sufficient area across the window.
Hanging the Valance
1. Measure and Mark the Window
Decide the size of the realm above the window the place you need to dangle the valance. Mark the middle of that area and two further factors on the outer edges, making certain every is equidistant from the middle.
2. Mark the Valance
Measure and mark the highest of the valance on the similar factors you marked on the window. These will assist you align the valance when hanging it.
3. Set up Mounting Brackets
Select brackets appropriate for the load of the valance. Set up them alongside the marked line on the wall, making certain they’re securely hooked up and degree.
4. Connect Valance Rod
Insert the rod into the brackets. Regulate the size of the rod if vital to suit the width of the window.
5. Mark Rod Place
Place the valance on the rod and mark the place the place the rod will relaxation on the brackets. Take away the valance and brackets.
6. Set the Depth and Safe the Valance
Fastidiously insert the rod again into the brackets on the marked place. Slowly slide the valance onto the rod, making certain the valance is positioned on the desired depth. Use screws or different fasteners to safe the valance to the rod for stability.
Step Motion 1 Measure and mark the window. 2 Measure and mark the valance. 3 Set up mounting brackets. 4 Connect valance rod. 5 Mark rod place. 6 Safe valance to rod and brackets. Securing the Cloth
As soon as the specified pleats have been created and pinned, it is time to safe the material to the valance board. Here is a complete information to make sure a safe {and professional} end:
1. Pinning the Cloth Edges:
– Place the material on the valance board with the fitting aspect going through up. Align the uncooked edges of the material with the sides of the board. – Use straight pins to safe the material to the board alongside all 4 sides. Insert the pins perpendicularly into the material and board, about 1-2 inches aside. 2. Stapling the Cloth:
Utilizing a staple gun, fastidiously staple the material to the board, ranging from the middle and dealing your approach outwards.
3. Spacing the Staples:
Area the staples roughly 1-2 inches aside to make sure a safe maintain with out damaging the material.
4. Reinforcing the Corners:
Pay particular consideration to the corners of the valance. Use further staples or tacks to bolster these areas, stopping the material from pulling away.
5. Trimming Extra Cloth:
As soon as the material is totally secured, use scissors to trim any extra material across the edges of the board.
6. Ironing the Cloth:
After the material has been secured, use an iron to press out any wrinkles or creases.
7. Non-compulsory: Including Warmth-Resistant Layer:
For valances that can be uncovered to direct daylight or warmth sources, think about including a heat-resistant layer between the material and the valance board. This may defend the material from fading or harm.
Ending Touches
8. Arranging the Swags
As soon as the valance is hung, you must prepare the swags to create a cultured and chic look. Here is how one can obtain the proper swag impact:
-
Decide the swag fashion: Resolve if you would like a easy swag or a extra elaborate looped swag. For a easy swag, merely collect the material on the middle of the valance and pin it.
-
Create the swag: For a looped swag, collect a beneficiant portion of cloth from the edges and produce it in direction of the middle. Fold the material in half, making a loop. Safe the loop with pins.
-
Pin the swag: Place the swag on the designated level on the valance and safe it with pins. Be certain that the swags are evenly spaced and the material is gracefully draped.
-
Regulate the size: The size of the swag is essential for attaining the specified impact. If the swag is just too lengthy, it should look cumbersome; if it is too quick, it should seem unbalanced. Regulate the size by folding or gathering the surplus material.
-
Pin the fullness: As soon as the size is adjusted, pin the fullness of the swag to create quantity. Distribute the pins evenly alongside the underside fringe of the swag to make sure a swish drape.
-
Safe the pins: Use robust stitching needles or upholstery pins to safe the swags securely. This may forestall them from shifting or slipping misplaced.
-
Create a number of swags: If desired, you’ll be able to create a number of swags alongside the size of the valance to realize a extra elaborate look. Comply with the identical steps for every swag, making certain symmetry and steadiness.
-
Closing changes: As soon as all of the swags are pinned, step again and observe the general impact. Make any vital changes to the size, fullness, or placement of the swags to refine the look.
By fastidiously following these steps, you’ll be able to obtain a fantastically organized valance with elegant swags that may improve the aesthetic enchantment of your room.
Section 1: Measure and Mark
Along with your brackets in place, use a spirit degree to attract a degree line throughout the wall the place you need the underside of your valance to hold. Use a tape measure to seek out the middle level of the window and mark it in your line. This would be the middle of your valance.
Section 2: Set up Brackets
Now it is time to mount your brackets on the wall. Maintain the bracket in opposition to the wall, aligning it with the middle mark you made in Section 1. Use a pencil to mark the screw holes by way of the holes within the bracket. Take away the bracket and drill pilot holes at every mark. Insert the included screws into the pilot holes and tighten them till the bracket is safe.
Section 3: Connect the Valance
Lastly, it is time to connect the valance to the brackets. Line up the valance with the brackets and punctiliously slide it onto the screws. Regulate the valance till it’s degree and safe. And that is it! You have efficiently put in your valance.
Troubleshooting Widespread Points
9. My valance is just too lengthy or too quick.
In case your valance is just too lengthy, you’ll be able to trim it to the specified size. Use a pointy pair of scissors to chop the material straight throughout the underside. In case your valance is just too quick, you’ll be able to add a cloth extender to the underside. Lower a bit of cloth that’s the similar width as your valance and the specified size of the extender. Fold the highest fringe of the extender over by 1 inch and press it. Then, align the extender with the underside of the valance and stitch it in place.
| Downside | Resolution |
|—|—|
| My valance is just too lengthy or too quick. | Trim it or add an extender. |
| My valance is crooked. | Regulate the brackets or valance. |
| My valance is sagging. | Tighten the screws or add help. |
| My valance is just not degree. | Realign the brackets or valance. |
| My valance is just not safe. | Tighten the screws or add extra brackets. |Valance Placement
Decide the peak of the window by measuring from the highest of the window body to the specified size of the valance. Mark this peak on the wall with a pencil.
Valance Size
Measure the width of the window and add 6-12 inches to every aspect for the valance to overlap the window body. Lower the material to the specified size and width.
Making a Pocket Rod
Fold the highest of the valance down by 3-4 inches and press it. Hem the folded edge to create a pocket for the curtain rod.
Mounting the Rod
Measure and mark the specified placement of the curtain rod on the wall, making certain it’s degree. Safe the rod into the wall utilizing screws or anchors.
Attaching the Valance
Slide the pocket rod of the valance over the curtain rod, ensuring it’s centered and degree.
Matching Window Trim
To offer a extra completed look, wrap the fabric used for the valance across the window trim and safe it with glue or staples. This may disguise any uncooked edges or gaps between the valance and the window body.
Ideas for a Skilled Look
1. Use high-quality material: Select a cloth that enhances the room’s decor and is sturdy sufficient to resist each day use. Think about materials like velvet, silk, or linen for a extra luxurious look.
2. Create a symmetrical design: Be certain that the valance is evenly spaced on each side of the window to create a balanced and visually pleasing look.
3. Use the right {hardware}: Select a curtain rod that’s robust sufficient to help the load of the valance and enhances the general fashion of the room.
4. Iron the material earlier than hanging: This may take away any wrinkles or creases and provides the valance a crisp, skilled look.
5. Add ornamental components: Improve the look of the valance with tassels, fringes, or different ornamental components to fit your private style and the fashion of the room.
6. Think about the peak of the ceiling: For top ceilings, an extended valance can create a extra dramatic impact, whereas a shorter valance could also be extra acceptable for decrease ceilings.
7. Take note of the lighting: If the window receives numerous pure gentle, think about using a sheer or light-weight material for the valance to permit gentle to move by way of. For rooms with much less gentle, go for heavier or darker materials to create a extra cozy ambiance.
8. Think about the scale of the window: A big window might require a wider or longer valance, whereas a small window might look finest with a extra petite valance.
9. Decorate with curtains: If the room requires extra privateness or gentle management, add curtains to enrich the valance and create a cohesive window remedy.
10. Experiment with totally different types: Valances are available in a variety of types, from conventional to modern. Discover totally different choices to seek out one which most closely fits your own home decor and private preferences. Think about the next fashion variations:
Type Description Flat Valance A straight piece of cloth that’s hung evenly throughout the highest of the window Gathered Valance A valance that’s gathered or pleated on the prime to create a extra ornamental and voluminous impact Scalloped Valance A valance that incorporates a scalloped or curved edge, including a contact of magnificence and curiosity Swag Valance A valance that’s draped or gathered within the center, making a swish and opulent look Balloon Valance A valance that resembles a collection of balloons, including a playful and kooky contact How To Put Up A Valance
A valance is an ornamental material that hangs excessive of a window, protecting the curtain rod or blinds. It may be used so as to add fashion and magnificence to a room, and may also assist to dam out gentle and enhance privateness. There are lots of alternative ways to place up a valance, and the most effective methodology will rely on the kind of valance you’ve got and the kind of window you’re putting in it on.
For a easy, gathered valance, you should use a curtain rod and a few rings or hooks. First, measure the width of the window and add 24 inches. This would be the size of your curtain rod. Set up the curtain rod above the window, ensuring that it’s degree. Then, collect the valance material and thread it onto the rings or hooks. Dangle the valance on the curtain rod, and regulate the gathers to create the specified fullness.
For a extra tailor-made look, you should use a board-mounted valance. One of these valance is made by attaching material to a board, which is then hung above the window. To make a board-mounted valance, you will want a bit of wooden that’s the width of the window plus 6 inches. Additionally, you will want material, batting, and a staple gun. Lower the material to the specified size and width, after which wrap it across the batting. Staple the material and batting to the board, ensuring that the sides are clean. Dangle the valance above the window utilizing screws or nails.
Folks Additionally Ask
How do you dangle a valance with no rod?
There are a number of methods to hold a valance with no rod. A technique is to make use of Command hooks. These hooks are designed to be damage-free, so they’re a great possibility if you do not need to place holes in your partitions. To make use of Command hooks, merely clear the wall floor after which press the hook into place. As soon as the hook is in place, you’ll be able to dangle the valance on the hook.
One other solution to dangle a valance with no rod is to make use of a stress rod. Stress rods are adjustable, to allow them to be used to suit a wide range of window sizes. To make use of a stress rod, merely prolong the rod to the specified size after which place it within the window body. The stress rod will keep in place by itself, and you’ll dangle the valance on the rod.
How excessive ought to a valance be hung?
The peak at which you dangle a valance will rely on the kind of valance you’ve got and the fashion of your room. For a easy, gathered valance, you’ll be able to dangle it about 4 inches above the highest of the window body. For a extra tailor-made look, you’ll be able to dangle it about 6 inches above the highest of the window body.
In case you are hanging a valance over blinds or curtains, you will want to hold it excessive sufficient in order that it doesn’t intervene with the operation of the blinds or curtains. You must also make it possible for the valance doesn’t block the sunshine from the window.
How do I get my valance to put flat?
In case your valance is just not laying flat, there are some things you are able to do to repair it. First, make it possible for the valance is hung evenly. If the valance is just not hung evenly, it should trigger the material to hold erratically. Second, you’ll be able to attempt utilizing a steamer to take away any wrinkles from the material. Lastly, you’ll be able to attempt utilizing a weight bar to overwhelm the underside of the valance. This may assist to maintain the valance hanging flat.
-
