Changing a defective bathroom tank is a comparatively easy plumbing job that may be accomplished with fundamental instruments and a little bit know-how. Step one is to take away the prevailing tank from the bowl. This may increasingly sound like a frightening job, however it’s really fairly easy. Right here is a simple step-by-step information on the best way to take away a rest room tank.
Earlier than you start, it is vital to assemble the required instruments and supplies. You will want a wrench, a pair of pliers, a putty knife, and a brand new bathroom tank. After getting every thing you want, you are able to get began. Step one is to show off the water provide to the bathroom. That is sometimes performed by turning the shut-off valve situated behind the bathroom. As soon as the water is turned off, you may flush the bathroom to empty the remaining water from the tank. Subsequent, it is advisable disconnect the water provide line from the tank. That is performed by utilizing a wrench to loosen the nuts that join the road to the tank.
As soon as the water provide line is disconnected, you may take away the tank from the bowl. To do that, merely carry the tank straight up and off the bowl. Watch out to not drop the tank, as it may be heavy. As soon as the tank is eliminated, you may change it with a brand new one. To do that, merely align the brand new tank with the bowl and decrease it into place. As soon as the tank is in place, you may reconnect the water provide line and activate the water provide. Lastly, it is advisable flush the bathroom to fill the brand new tank with water.
Lifting the Tank Off the Rest room Bowl
To start, find the 2 nuts that safe the tank to the bowl. These nuts are sometimes product of plastic and are situated on both facet of the tank’s base. Utilizing a pair of pliers or an adjustable wrench, fastidiously loosen the nuts by turning them counterclockwise.
As soon as the nuts are unfastened, assist the load of the tank from beneath. This may be performed by inserting your palms beneath the tank’s base or by utilizing a towel or piece of cardboard as a assist.
Now, gently carry the tank straight up off the bowl. Watch out to not tilt or twist the tank as you carry, as this might harm the tank or the bowl.
If the tank is caught, you may strive jiggling it forwards and backwards barely whereas making use of upward strain. Don’t use extreme pressure, as this might break the tank.
As soon as the tank is free, set it apart in a protected place. You’ll now have entry to the bathroom’s inside elements, together with the fill valve, flush valve, and overflow tube.
Suggestions for Lifting a Heavy Tank:
| Tip | Description |
|---|---|
| Use a helper | If the tank is especially heavy, ask a pal or member of the family that will help you carry it. |
| Use a strap | For further assist, you may wrap a strap across the tank’s base and use it to carry the tank. |
| Raise along with your legs | To keep away from straining your again, bend your knees and carry the tank along with your legs as a substitute of your again. |
Eradicating the Fill Valve
The fill valve is a vital part of a rest room’s flushing mechanism. It regulates the stream of water into the tank, guaranteeing the bathroom flushes adequately. Eradicating the fill valve requires a number of easy steps:
1. Flip off the water provide to the bathroom.
2. Flush the bathroom to take away any remaining water from the tank.
3. Take away the cap protecting the fill valve’s adjustment screw.
4. Flip the adjustment screw counterclockwise to decrease the water stage within the tank.
5. Pinch the fill valve’s tube to launch any remaining water.
6. Find the locknut that secures the fill valve to the tank.
7. Utilizing a wrench or pliers, unscrew the locknut and thoroughly take away the fill valve from the tank.
Some bathrooms could have a unique sort of fill valve, equivalent to a diaphragm fill valve or a piston fill valve. In case you are uncertain the best way to take away your fill valve, seek the advice of the bathroom producer’s directions.
Security Precautions:
When working in your bathroom, it’s important to take the next precautions to your security:
- Put on gloves to guard your palms.
- Use a wrench or pliers which are the proper dimension for the locknut.
- Don’t overtighten the locknut.
- Flip off the water provide earlier than beginning work.
Reattaching the Tank to the Bowl
As soon as the tank is eliminated, you may start to reattach it to the bowl. Earlier than you do, be sure that the bowl is clear and freed from any particles.
To reattach the tank, observe these steps:
1.
Take away the 2 nuts that safe the tank bolts. Put the rubber washers from the underside of the tank on the bolts contained in the tank.
2.
Place the tank on the bowl, aligning the bolts with the holes within the bowl.
3.
Thread the nuts onto the bolts and tighten them till they’re comfortable. Don’t overtighten the nuts, as this could crack the tank.
4.
Test the tank for leaks by operating water into it. In the event you see any leaks, tighten the nuts additional.
5.
Exchange the tank lid.
As soon as the tank is reattached, you may reconnect the water provide and activate the water. Test for leaks as soon as once more earlier than utilizing the bathroom.
How To Take away The Tank From A Rest room
Eradicating the tank from a rest room is a comparatively easy job that may be accomplished in a couple of minutes. Nonetheless, it is very important take precautions to keep away from damaging the bathroom or the tank. Listed below are the steps on the best way to take away the tank from a rest room:
- Flip off the water provide to the bathroom. That is sometimes performed by turning the valve situated behind the bathroom.
- Flush the bathroom to empty the tank.
- Disconnect the water provide line from the tank. That is sometimes performed by loosening the nuts that join the road to the tank.
- Raise the tank straight up off of the bathroom bowl. Watch out to not harm the tank or the bathroom bowl.
